Materials Preparation Center logo decorative line 1x1 pixel
MATERIALS PREPARATION CENTER
decorative line 1x1 pixel decorative line 1x1 pixel decorative line 1x1 pixel
  decorative line 1x1 pixel  
<<BACK   decorative line 1x1 pixel
casting equipment  
Bottom Pour Chill Casting Unit
This casting unit uses induction heat to melt metal alloys in a crucible. When the alloy is molten, a stopper rod is raised to allow the metal to pour into a water cooled copper mold.
• Molds are available in 1 and 2 inch diameters.
• Maximum ingot length is 12 inches
• Vacuum or inert gas atmosphere
• MPC has a second chill casting unit which will cast ingots of 3, 4, and 5 inch diameters up to 17" in length.
  decorative line 1x1 pixel  
decorative line 1x1 pixel decorative line 1x1 pixel decorative line 1x1 pixel
Ames Laboratory Logo decorative line 1x1 pixel
  decorative line 1x1 pixel




Valid XHTML 1.0 Transitional      Valid CSS!